Metal-Interface veille à la protection de votre vie privée : lorsque vous soumettez une demande ou posez une question, vos informations personnelles sont transmises au fournisseur concerné ou, si nécessaire, à l'un de ses responsables régionaux ou distributeurs qui pourra vous apporter une réponse directe. Consultez notre Politique de Confidentialité pour en savoir plus sur les modalités et objectifs du traitement de vos données, ainsi que vos droits relatifs à ces informations. En continuant à naviguer sur notre site, vous acceptez nos conditions générales d'utilisation.

  • The conventional rotary dies are used for the special purposes and regarded as the special ones. My Die changes those idea. Optimise your processes Press release

    My Die, a unique rotary bending die as against the present rotary dies

    Publié le 13/10/20
Submitted by a.merlet.securite on Tue 13/10/2020 - 04:24
Contenu

  • TY Associates Japan started to make a business in 1996 and has been supplying the unique and "only one" product world-widely.

    We supply the bending products such as My Die, Sushi Bend, Crowning meister, one touch 1V die clamp etc.

     

  • My Die, a unique rotary bending die as against the present ones.

    StructureThe conventional rotary dies are used for the special purposes and and regarded as the special dies.

    My Die changes those idea with its unique structure.

    1)V dies are needed to be changed depending on the material and thickness since the bend allowance is different. Using My Die, you need not change the die changeover unlike V dies. In addition, the bend allowance of My Die is almost same as V dies(depending on the type of My Die, though.)

    2)Due to the unique structure of My Die, My Die realizes the high precise bending angle, the reduction of warp and swell in bending.

    3)My Die achieves the short flange bending than V dies.
     

Thank you! Your article is registered.
Close